Applications:

Use:

Specifications:

Features:

Construction: Machined components are manufactured using solid bar stock.; Steel componentry is plated using ROHS Compliant Trivalent Chrome.

Available Options:

Compatibility & Interchange Data: Foster 3, 4, 5 and 6 Series; Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange; Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500

How it works: To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.; Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.; After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.; After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Installation:

Instructions

Note:

Safety notes: It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.; WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.