Applications:

Use:

Specifications:

Features:

Construction: Machined components are manufactured using solid bar stock.; Steel componentry is plated using ROHS Compliant Trivalent Chrome.

Available Options:

Compatibility & Interchange Data: Foster 3, 4, 5 and 6 Series; Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange; Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500

How it works: To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.; Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.; After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.; After the line is fully exhausted, you are able to safely separate the nipple from the coupler.After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Installation:

Instructions

Note:

Safety notes: It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.; WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.